EDUCATION / ARTICLE
PSLE Science Circuits: Trace the Path Through the Bulb
TestPapersFree · 2026-11-20 08:04:53
In an SGExams discussion about PSLE preparation, a commenter identified time management on open-ended Science questions as a challenge. Circuit diagrams are a good place to practise a short routine that helps with both the working and the written explanation. MOE’s Primary Science syllabus places electrical systems in Primary 5 Standard Science and includes understanding that a closed circuit allows current to flow. SGExams PSLE preparation discussion · MOE Primary Science syllabus
Follow the route with a pencil
Start at one terminal of the cell. Follow the wire until you reach the next component. If you meet an open switch, stop at the gap. If you reach a bulb, check which metal contact the wire touches and whether the route continues from the other contact. Keep tracing until you reach the other terminal of the cell. For a simple torch-style filament bulb, the small metal tip at the base and the metal side are the two contacts. In a symbol diagram the two sides of the bulb symbol serve the same purpose.
Try drawing an original example. Connect one terminal of a cell to a closed switch and the switch to the tip of a working bulb. Connect the metal side of the bulb to the other terminal of the cell. The bulb lights because the connections form a closed path through its filament. Erase the last wire. The route now stops at the bulb’s side contact, leaving the path through the filament open. The bulb stays dark.
Check which part of the circuit the loop includes
Some drawings are harder because there is a path between the cell terminals, but the path bypasses the filament. Draw two wires that both connect to the tip of the bulb, with the side contact left clear. The route between the cell terminals runs through the shared contact without passing through the filament. The explanation should name the shared contact and say what that means for current through the bulb. Keep this example on paper, since that wiring can short-circuit a real cell.
Compare the two dark-bulb examples. In the first one the return wire is missing. In the second one the return wire goes to the same contact. In both cases there is no complete path through the filament. An answer such as “the circuit is wrong” leaves out the clue that distinguishes the diagrams. Ask your child to point to the missing connection or the two wires on the shared contact before writing.
Write the cause and the result
For an explain question, begin with the feature visible in the diagram. Then connect it to the result. For the missing return wire, a possible answer is: “The metal side of the bulb is disconnected, so there is no closed path through the filament. No current flows through it and the bulb does not light.” If the question asks how to fix the circuit, give the action instead. In this drawing that means connecting the metal side of the bulb to the free terminal of the cell.
For a short practice session, choose one circuit question from a Primary 5 or 6 paper. First have your child explain it aloud while tracing. Then hide the explanation and let your child write from the diagram. Check whether the written answer names the same wire, contact or switch that the child pointed to. Once the explanation is reliable, try another question with a brief time limit. TestPapersFree Primary Science papers
Add Comment
This policy contains information about your privacy. By posting, you are declaring that you understand this policy:
This policy is subject to change at any time and without notice.
These terms and conditions contain rules about posting comments. By submitting a comment, you agree with these rules:
Failure to comply with these rules may result in being banned from submitting further comments.
These terms and conditions are subject to change at any time and without notice.
Comments