EDUCATION / ARTICLE
Secondary Physics Transformers: Work Out Voltage Before Current
TestPapersFree · 2026-11-18 08:04:17
A transformer can increase voltage while decreasing current. Those changes are connected by power, which is why one turns ratio can lead to two different-looking calculations. In the 2026 O-Level Physics Paper 2 discussion on r/SGExams, a student flagged the transformer question and another asked what it meant. The worked examples here use an original circuit description and values. 2026 O-Level Physics discussion
Explain how the secondary coil gets a voltage
Draw two separate coils around a common iron core. The primary coil is connected to the input supply. An alternating current in the primary produces a changing magnetic field in the core. The changing magnetic flux through the secondary coil induces an electromotive force, or e.m.f., across that coil. With a closed path through a load on the secondary side, the induced e.m.f. drives a current. You can therefore have a voltage across the open secondary terminals, with current flowing only when a path is completed.
In a written explanation, follow the same order as the diagram. Begin with the primary current, name what changes in the core, then say what is induced in the secondary. A steady direct current produces a steady field once the switch-on change has passed. The secondary therefore has no sustained induced e.m.f. from that steady input. The 2027 G3 Physics syllabus covers both the operation of a simple iron-cored transformer and calculations for an ideal transformer. SEAB lists 6091 as the corresponding 2026 O-Level Physics code. SEAB 2027 G3 Physics syllabus · SEAB 2026 O-Level syllabus listing
Use the turns ratio for voltage
Take an ideal transformer with 600 turns on the primary, 150 turns on the secondary and a primary voltage of 24 V a.c. Label the primary quantities P and the secondary quantities S. The ratio VS/VP equals NS/NP. The secondary has one-quarter as many turns, so VS = 24 × 150/600 = 6 V. The direction of change is a useful check. This is a step-down transformer, and its output voltage should be smaller than its input voltage.
Use ideal power to find the current
Suppose the secondary supplies 0.80 A to a resistive load. For the ideal transformer in this example, use VPIP = VSIS. The secondary delivers 6 × 0.80 = 4.8 W, so the primary current is 4.8 ÷ 24 = 0.20 A. At one-quarter of the input voltage, the secondary current is four times the primary current for this load. If you get 0.05 A on the primary side, multiply it by 24 V. The result is 1.2 W, which fails the equal-power check.
A real transformer dissipates some energy. If a question gives both terminal powers or supplies an efficiency, use that information to relate input and output. Keep the question’s assumptions beside your equations because the equal-power shortcut depends on the ideal model.
Try a step-up case and explain the result
Keep the 24 V supply and the 600-turn primary. Replace the secondary with 1,500 turns. In the ideal calculation, the output is 60 V. If the primary current is now 1.0 A, the output current is 24 ÷ 60 = 0.40 A for a resistive load. Check that both sides give 24 W. This relationship also helps explain why high voltage is useful in transmission. For a given transmitted power, a higher voltage allows a lower current, which reduces heating losses in cables of a given resistance.
When you pick a practice question, aim to produce two complete answers from the same diagram. Write one sentence sequence to explain induction, then solve the numerical part with units and an independent power check. Try this with school prelim material from the Pure Physics collection. TestPapersFree Secondary Pure Physics papers
Add Comment
This policy contains information about your privacy. By posting, you are declaring that you understand this policy:
This policy is subject to change at any time and without notice.
These terms and conditions contain rules about posting comments. By submitting a comment, you agree with these rules:
Failure to comply with these rules may result in being banned from submitting further comments.
These terms and conditions are subject to change at any time and without notice.
Comments